Competitive adsorption mechanisms of Cd(II), Cu(II) and Pb(II) on bioinspired mesoporous silica revealed by complementary adsorption/isothermal titration calorimetry studies.

This study presents the adsorption properties of a bioinspired grafted mesoporous silica material and the competitive effects between Cd(II) or Cu(II) and Pb(II) during the adsorption process. Glutathione, a natural antioxidant known for its metal binding properties, has been successfully grafted to SBA-15 mesoporous silica and the optimum adsorption parameters were determined. This original and multidisciplinary approach combines classical adsorption studies with thermodynamic investigations to understand the adsorption behavior of Cd(II), Cu(II) and Pb(II) on this material. To this end, isothermal titration calorimetry (ITC) has been used to elucidate the mechanisms of single-metal and two-metal adsorption. The results showed affinity in the order Pb(II) > Cu(II) > Cd(II) in single metal systems. Cd(II) adsorption relied mainly on physical contributions while Cu(II) and Pb(II) adsorption was shown to be chemically driven. Two-metal systems highlighted that Cd(II) and Pb(II) are adsorbed on the same coordination sites, whereas Cu(II) and Pb(II) are adsorbed on different sites. The material showed good selectivity and encouraging results were obtained on real effluents.

α-Aminobisphosphonate Copolymers Based on Poly(ε-caprolactone)s and Poly(ethylene glycol): A New Opportunity for Actinide Complexation.

Original α-aminobisphosphonate-based copolymers were synthesized and successfully used for actinide complexation. For this purpose, poly(α-chloro-ε-caprolactone-co-ε-caprolactone)-b-poly(ethylene glycol)-b-poly(α-chloro-ε-caprolactone-co-ε-caprolactone) copolymers were first prepared by ring-opening copolymerization of ε-caprolactone (εCL) and α-chloro-ε-caprolactone using poly(ethylene glycol) (PEG) as a macro-initiator and tin(II) octanoate as a catalyst. The chloride functions were then converted to azide moieties by chemical modification, and finally α-aminobisphosphonate alkyne ligand (TzBP) was grafted using click chemistry, to afford well-defined poly(αTzBPεCL-co-εCL)-b-PEG-b-poly(αTzBPεCL-co-εCL) copolymers. Three copolymers, showing different α-aminobisphosphonate group ratios, were prepared (7, 18, and 38%), namely, CP8, CP9, and CP10, respectively. They were characterized by 1H and 31P NMR and size exclusion chromatography. Sorption properties of these copolymers were evaluated by isothermal titration calorimetry (ITC) with neodymium [Nd(III)] and cerium [Ce(III)] cations, used as surrogates of actinides, especially uranium and plutonium, respectively. ITC enabled the determination of the full thermodynamic profile and the calculation of the complete set of thermodynamic parameter (ΔH, TΔS, and ΔG), with the Ka constant and the n stoichiometry. The results showed that the number of cations sorbed by the functional copolymers logically increased with the number of bisphosphonate functions borne by the macromolecular chain, independently of the complexed cation. Additionally, CP9 and CP10 copolymers showed higher sorption capacities [21.4 and 34.0 mg·g-1 for Nd(III) and 9.6 and 14.3 mg·g-1 for Ce(III), respectively] than most of the systems previously described in the literature. CP9 also showed a highest binding constant (7000 M-1). These copolymers, based on non-toxic and biocompatible poly(ε-caprolactone) and PEG, are of great interest for external body decontamination of actinides as they combine high number of complexing groups, thus leading to great decontamination efficiency, and limited diffusion through the skin due to their high-molecular weight, thus avoiding additional possible internal contamination.

Hydrophobic dye solubilization via hybrid imogolite nanotubes probed using second harmonic scattering.

This article explores the organization and interactions of Disperse Orange 3 (DO3) hydrophobic dye molecules within hybrid organic-inorganic imogolite nanotubes. In pure water, the DO3 dye molecules self assemble into large insoluble 2D nanosheets whose structure is also explored by molecular dynamics simulations. The dye molecules are however efficiently solubilized in the presence of hybrid imogolite nanotubes. The filling of the internal hydrophobic cavity of the nanotubes is quantified. The organization of the molecules inside the nanotube is probed using the polarization resolved second harmonic scattering (SHS) technique coupled with simulation. At the highest loading, the dyes fill the nanotube with their principal axis parallel to the nanotube walls showing a strong SHS signal due to this encapsulation.

Size and Strain of Zinc Sulfide Nanoparticles Altered by Interaction with Organic Molecules.

Nanosized zinc sulfides (nano-ZnS) have size-dependent and tunable physical and chemical properties that make them useful for a variety of technological applications. For example, structural changes, especially caused by strain, are pronounced in nano-ZnS < 5 nm in size, the size range typical of incidental nano-ZnS that form in the environment. Previous research has shown how natural organic matter impacts the physical properties of nano-ZnS but was mostly focused on their aggregation state. However, the specific organic molecules and the type of functional groups that are most important for controlling the nano-ZnS size and strain remain unclear. This study examined the size-dependent strain of nano-ZnS synthesized in the presence of serine, cysteine, glutathione, histidine, and acetate. Synchrotron total scattering pair distribution function analysis was used to determine the average crystallite size and strain. Among the different organic molecules tested, those containing a thiol group were shown to affect the particle size and size-induced strain most strongly when added during synthesis but significantly reduced the particle strain when added to as-formed nano-ZnS. The same effects are useful to understand the properties and behavior of natural nano-ZnS formed as products of microbial activity, for example, in reducing environments, or of incidental nano-ZnS formed in organic wastes.

Driving Forces of Cationic Dye Adsorption, Confinement, and Long-Range Correlation in Zeolitic Materials.

Zeolitic materials are commonly used to capture emergent contaminants in water or complex aqueous effluents. The efficiency of this adsorption depends strongly on the guest-host interactions and on the surrounding environment with possible coadsorption of the solvent. Only a few experimental techniques are available to probe in situ the sequestration processes at the solid/liquid interface. We propose in the present work to combine the second harmonic scattering technique with isothermal titration calorimetry in order to investigate the adsorption and the confinement of a hemicyanine dye adsorbed inside faujasite materials. The methodology described here permits the quantification of the correlations between the confined dyes in the material and thus gives local information about the organization at the nanometer scale. Various impacts, such as the effect of the solvent type and the silicon to aluminum ratio of the zeolitic adsorbent, are quantitatively estimated and discussed. This work highlights that the most correlated system matches the higher adsorption capacity associated with the lower entropic contribution.

MUSIC Speciation of γ-Al2O3 at the Solid Liquid Interface: How DFT Calculations Can Help with Amorphous and Poorly Crystalline Materials.

Transition aluminum oxides, such as γ-Al2O3 or alumina, are widely used in many different technical applications that rely on the surface reactivity of this material at the solid liquid interface. The speciation of surface sites of this material confronts several obstacles. On the one hand, alumina is a poorly crystalline oxide, thus allowing for a limited amount of empirical structural information for an important number of surface sites with different trends in reactivity and, on the other hand, it is a metastable material. In this work, we show several ways in which the multisite complexation model, combined with atomistic information from density functional theory and ab initio molecular dynamics (AIMD), can manage to perform speciation calculations of γ-Al2O3 surface sites at the solid liquid interface. Although the results are in good qualitative agreement with experimental titration curves, and they can serve as a guide for the interpretation of the reactivity of this material at the initial stages of an impregnation experiment and chemical weathering phenomena, this work highlights the need of more complex AIMD simulations to accurately model these phenomena in γ-Al2O3 surface/liquid interfaces.

Microwave-assisted hydrothermal synthesis of manganate nanoflowers for selective retention of strontium.

An alternative microwave-assisted hydrothermal route for the preparation of manganate nanoflowers under basic conditions has been proposed in view of potential uses in selective retention of strontium from multicomponent aqueous streams. Based on the combination of such characterization techniques as Scanning and Transmission Electronic Microscopy, X-ray photoelectron spectroscopy, and X-ray Diffraction, as well as taking advantage of the computer-aided structure simulation, homogeneous nanoflower morphology possessing a layered structure and K+ compensating cations was evidenced as corresponding to the KMn4O8 chemical formula. The nanoflower sample was subsequently tested for the selective adsorption of strontium and cesium by measuring the individual adsorption isotherms from single-solute and multicomponent aqueous solutions. The material appeared selective towards strontium against cesium even in multicomponent solutions provided that the concentration of calcium remained low. This difference in the retention selectivity was rationalized based on the Density Functional Theory (DFT) calculations of the energy of adsorption and direct calorimetry measurements of the enthalpy of displacement for the individual cations.

The effect of chelating anions on the retention of Co(II) by γ-alumina from aqueous solutions under the unadjusted pH condition of supported catalyst preparation.

This study analyzes the effect of the addition of acetate, citrate, and nitrilotriacetate anions on the retention of Co(II) cations by the γ-alumina surface in view of the preparation of alumina supported cobalt catalysts. The emphasis was placed on the way the Co(II) species attach to the solid surface when adsorbed from aqueous solutions under the unadjusted pH condition. The individual adsorption isotherms onto γ-Al2O3 support for cobalt and a given ligand were determined by following the solution depletion method in single-solute and bi-solute systems. These adsorption data were supplemented by the results of potentiometric titrations. In the case of bi-solute systems, the adsorption procedures allowed either co-impregnation of γ-alumina with equimolar solutions of cobalt and ligand salts or pre-impregnation of γ-alumina with the ligand anions and the subsequent adsorption of cobalt. Changes in the pH of the equilibrium solid-liquid suspension were also monitored along the adsorption isotherms. The adsorption of Co(II) onto γ-Al2O3 in the presence of acetate and nitrilotriacetate led to the formation of the type A (i.e., solid-metal-ligand) ternary complexes. The use of citrate anions together with Co(II) cations was shown to improve the impregnation process through the formation of ternary complexes of type B (i.e., solid-ligand-metal). The comparison with a system containing tricarballylate anions allowed concluding that the presence of the hydroxyl group in the citrate anion enhanced its affinity for the alumina surface by contributing to the inner-sphere character of its surface-bound complexes.

Second-Harmonic Scattering in Layered Double Hydroxide Colloids: A Microscopic View of Adsorption and Intercalation.

The interaction of methyl orange dye with a layered double hydroxide colloidal material is investigated using real-time polarization-resolved second-harmonic scattering (SHS). Interlayer charge compensating anion exchange is studied from initial carbonate or nitrate anions to methyl orange negatively charged dye. A theoretical model, taking into account the field retardation effect, is presented to simulate the polarization-resolved SHS experiments. Various geometrical dye configurations inside or around the host material have been modeled. A comparison with the experimental data permits to give a microscopic description of the dye organization and its time evolution during the intercalation process in the material.

Recent developments in nanostructured inorganic materials for sorption of cesium and strontium: Synthesis and shaping, sorption capacity, mechanisms, and selectivity-A review.

Liquid wastes containing non-ferrous heavy metal ions and some radionuclides, 137Cs and 90Sr in particular, represent one of the most dangerous sources of environmental contamination. The remediation of wastewater containing such pollutants continue to be among the biggest challenges of Sustainable Development and Environmental Safety. Sorption-based technologies have proven their efficiency also in reducing the radionuclide content in aqueous streams to low-level residual activity, with the concomitant decrease in the amount of ultimate solid waste generated. Although sorption of cesium and strontium by resins, clays, and zeolites has been investigated intensively and even used in real applications, there is still considerable scope for improvement in terms of retention capacity and selectivity. Recent progress in design and preparation of nanostructured inorganic materials has attracted growing interest based on the potential for improving the retention performance when coupling such functionalities as ion exchange capacity, structural flexibility that may result in steric retention effects, as well as the propensity to interact specifically with the target metal cations. Titanate, vanadate, and tungsten based materials, manganese oxides, hexacyanoferrates, metal sulfides, ammonium molybdophosphates, or hydroxyapatite, characterized by various structures and morphologies, are reviewed with the emphasis being put on synthesis and shaping of such materials, their structure in relationship with the capacity and selectivity of trapping cesium and strontium from either single or multi-component aqueous solutions, as well as the possible retention mechanism. The potential candidates for remediation uses are selected with regard to their sorption capacity and distribution coefficient towards target cations, and also the pH window for an optimum cation capture.

Capture of actinides (Th4+, [UO2]2+) and surrogating lanthanide (Nd3+) in porous metal-organic framework MIL-100(Al) from water: selectivity and imaging of embedded nanoparticles.

Aluminium-based metal-organic framework MIL-100 was utilized for the capture of actinide ([UO2]2+, Th4+) and lanthanide (Nd3+) cations. The results indicate a very quick sorption process, leading to very high cation uptakes together with selectivity for Th4+.

Interactions between Oppositely Charged Polyelectrolytes by Isothermal Titration Calorimetry: Effect of Ionic Strength and Charge Density.

In this study, binding of linear poly(l-lysine) to a series of acrylamide and 2-acrylamido-2-methyl-1-propanesulfonate copolymers was examined by isothermal titration calorimetry (ITC). Binding constant and stoichiometry were systematically determined at different ionic strengths and for different polyanion charge densities varying between 15% and 100%. The range of investigated ionic strengths was carefully adjusted according to the polyanion charge densities to get measurable binding constants (i.e., formation binding constant typically comprised between 104 and 106 M-1) by isothermal titration calorimetry (ITC). The number of released counterions during the polyelectrolyte complex formation was determined from the log-log dependence of the binding constant according to the ionic strength and was compared to the total number of condensed counterions estimated from the Manning theory. Experimental results obtained by ITC are in very good agreement with those previously obtained by frontal analysis continuous capillary electrophoresis (FACCE) and can be used to model and predict the binding parameters at any ionic strength or any polyanion charge density. Thermodynamic parameters of the complexation between the oppositely charged polyelectrolytes confirm that the complex formation was entropically driven together with a favorable (but minor) enthalpic contribution. For the first time, specificities, advantages/disadvantages of ITC, and FACCE techniques for studying polyelectrolyte complexations are compared and discussed, using the same experimental conditions.

Ionosilicas as efficient sorbents for anionic contaminants: Radiolytic stability and ion capacity.

Ammonium based hybrid ionosilicas were prepared from tetrasilylated ammonium precursors. The formed material exhibited high specific surface area together with mesoporosity. Our results indicate that ionosilicas display high exchange capacity for iodide. They were submitted to 10MeV electron irradiation at a total dose of 1.7MGy. Irradiation was shown not to alter the properties of ionosilica: the morphological, textural and surface properties of the material are hardly modified. The sorption properties (sorption capacity and cumulative displacement enthalpy) are similar before and after electron irradiation. This high radiolytical stability confirms that these innovative materials have therefore high potential as anion traps for future applications in decontamination processes or long term storage of radioactive waste.

Micellization Behavior of Long-Chain Substituted Alkylguanidinium Surfactants.

Surface activity and micelle formation of alkylguanidinium chlorides containing 10, 12, 14 and 16 carbon atoms in the hydrophobic tail were studied by combining conductivity and surface tension measurements with isothermal titration calorimetry. The purity of the resulting surfactants, their temperatures of Cr→LC and LC→I transitions, as well as their propensity of forming birefringent phases, were assessed based on the results of ¹H and (13)C NMR, differential scanning calorimetry (DSC), and polarizing microscopy studies. Whenever possible, the resulting values of Krafft temperature (TK), critical micelle concentration (CMC), minimum surface tension above the CMC, chloride counter-ion binding to the micelle, and the standard enthalpy of micelle formation per mole of surfactant (ΔmicH°) were compared to those characterizing alkyltrimethylammonium chlorides or bromides with the same tail lengths. The value of TK ranged between 292 and 314 K and increased strongly with the increase in the chain length of the hydrophobic tail. Micellization was described as both entropy and enthalpy-driven. Based on the direct calorimetry measurements, the general trends in the CMC with the temperature, hydrophobic tail length, and NaCl addition were found to be similar to those of other types of cationic surfactants. The particularly exothermic character of micellization was ascribed to the hydrogen-binding capacity of the guanidinium head-group.

On the real performance of cation exchange resins in wastewater treatment under conditions of cation competition: the case of heavy metal pollution.

Sorption performance of cation-exchange resins Amberlite® IRN77 and Amberlite™ IRN9652 toward Cs(I) and Sr(II) has been tested in single-component aqueous solutions and simulated waste effluents containing other monovalent (Effluent 1) or divalent (Effluent 2) metal cations, as well as nitrate, borate, or carbonate anions. The individual sorption isotherms of each main component were measured by the solution depletion method. The differential molar enthalpy changes accompanying the ion-exchange between Cs+ or Sr2+ ions and protons at the resin surface from single-component nitrate solutions were measured by isothermal titration calorimetry and they showed a higher specificity of the two resins toward cesium. Compared to the retention limits of both resins under such idealized conditions, an important depression in the maximum adsorption capacity toward each main component was observed in multication systems. The overall effect of ion exchange process appeared to be an unpredictable outcome of the individual sorption capacities of the two resins toward various cations as a function of the cation charge, size, and concentration. The cesium retention capacity of the resins was diminished to about 25% of the "ideal" value in Effluent 1 and 50% in Effluent 2; a further decrease to about 15% was observed upon concomitant strontium addition. The uptake of strontium by the resins was found to be less sensitive to the addition of other metal components: the greatest decrease in the amount adsorbed was 60% of the ideal value in the two effluents for Amberlite® IRN77 and 75% for Amberlite™ IRN9652. It was therefore demonstrated that any performance tests carried out under idealized conditions should be exploited with much caution to predict the real performance of cation exchange resins under conditions of cation competition.

Demonstrating the benefits and pitfalls of various acidity characterization techniques by a case study on bimodal aluminosilicates.

A new combination of a volumetric with a dynamic method to investigate the acidity properties of aluminosilicates is introduced. In the first step, the total acidity is determined volumetrically by the measurement of two-cycle adsorption (TCA) isotherms with ammonia as a probe, directly followed by a dynamic temperature-programmed desorption (TPD) experiment to define the acid strength distribution. Furthermore, the results obtained by the new direct combination of TCA and TPD are validated by comparison with an in-situ FTIR (Fourier transform infrared) study with the same probe molecule on the same materials. Both acidity characterization techniques are compared, and we comment on their complementarity, benefits, and pitfalls. The material under investigation is a new type of bimodal microporous and mesoporous material with zeolitic characteristics, synthesized by a mesotemplate-free method. The acidic nature of the novel material is compared to two reference materials: a crystalline zeolite and a mesoporous aluminum incorporated mesocellular foam (Al-MCF) with amorphous characteristics.

What are the main contributions to the total enthalpy of displacement accompanying the adsorption of some multivalent metals at the silica-electrolyte interface?

The integral molar enthalpies of displacement, Δdplh, accompanying adsorption of Mg(II), Ca(II), Sr(II), Ba(II), Cd(II), Co(II), Zn(II), and Eu(III) cations from aqueous solutions of metal nitrate onto Spherosil XO75LS at 298K were determined based on the combination of liquid flow calorimetry and classical adsorption for two degrees of surface coverage: 0.035µmolm(-2) and 0.08µmolm(-2), in the presence of 0.1molL(-1) sodium nitrate in the aqueous phase at pH 5, 6, and 7. The displacement was shown to be endothermic and quite independent of the chemical specificity of the adsorbing metal. Two enthalpy effects were postulated to contribute mostly to the positive Δdplh values, depending on the experimental pH value: (i) cation dehydration upon adsorption and (ii) deprotonation of surface silanols to create negatively charged SiO(-) sites. Changing proportions among the various adsorbed species, including "free" Eu(3+) or Cd(2+) cations and hydrolyzed Eu(OH)(2+), Eu(OH)2(+) or Cd(OH)(+) cations, were accepted to explain the downward trends in Δdplh with increasing extent of adsorption for Eu(III) and Cd(II).

Driving force for the hydration of the swelling clays: case of montmorillonites saturated with alkaline-earth cations.

Important structural modifications occur in swelling clays upon water adsorption. The multi-scale evolution of the swelling clay structure is usually evidenced by various experimental techniques. However, the driving force behind such phenomena is still not thoroughly understood. It appears strongly dependent on the nature of the interlayer cation. In the case of montmorillonites saturated with alkaline cations, it was inferred that the compensating cation or the layer surface could control the hydration process and thus the opening of the interlayer space, depending on the nature of the interlayer cation. In the present study, emphasis is put on the impact of divalent alkaline-earth cations compensating the layer charge in montmorillonites. Since no experimental technique offers the possibility of directly determining the hydration contributions related to interlayer cations and layer surfaces, an approach based on the combination of electrostatic calculations and immersion data is developed here, as already validated in the case of montmorillonites saturated by alkaline cations. This methodology allows to estimate the hydration energy for divalent interlayer cations and therefore to shed a new light on the driving force for hydration process occurring in montmorillonites saturated with alkaline-earth cations. Firstly, the surface energy values obtained from the electrostatic calculations based on the Electronegativity Equalization Method vary from 450 mJ m(-2) for Mg-montmorillonite to 1100 mJ m(-2) for Ba-montmorillonite. Secondly, considering both the hydration energy for cations and layer surfaces, the driving force for the hydration of alkaline-earth saturated montmorillonites can be attributed to the interlayer cation in the case of Mg-, Ca-, Sr-montmorillonites and to the interlayer surface in the case of Ba-montmorillonites. These results explain the differences in behaviour upon water adsorption as a function of the nature of the interlayer cation, thereby allowing the macroscopic swelling trends to be better understood. The knowledge of hydration processes occurring in homoionic montmorillonites saturated with both the alkaline and the alkaline-earth cations may be of great importance to explain the behaviour of natural clay samples where mixtures of the two types of interlayer cation are present and also provides valuable information on the cation exchange occurring in the swelling clays.

Bulk hydrolysis and solid-liquid sorption of heavy metals in multi-component aqueous suspensions containing porous inorganic solids: are these mechanisms competitive or cooperative?

Fundamental aspects of the removal of heavy metals from aqueous streams under conditions of competition among the various species have been studied between pH 3 and 9 on Spherosil XO75LS, ordered mesoporous MCM-41 and MCF silicas, as well as a MCF sample grafted with (3-aminopropyl)methoxydimethylsilane (AMPS-MCF). Cd(II), Co(II), Pb(II), or Sr(II) nitrate solutions were used to determine the percentage of metal uptake by each solid at 298 K as a function of the pH of the equilibrium solution, at an initial metal concentration of 0.0001 mol L(-1) and the ionic strength being fixed with 0.01 mol L(-1) NaNO(3). Almost complete retention of the heavy metals on the four solid samples was observed, with the process beginning at pH values smaller than those marking the onset of "bulk" precipitation of a given metal in "free" solution. The heavy metal-uptake mechanism was regarded as hydrolysis-like phenomenon in metal-containing solid suspensions. Weak adsorption of metal species from slightly acidic and neutral solutions was a kind of nucleation step. Adding cadmium to an equimolar solution containing cobalt, lead, or strontium showed no significant effect on the retention of the main metal component. This indicated the great independence of the retention mechanisms.